Loading...
MSAP | MSAP X3

Multi-Service Access Platform

MSAP-X3

Compact MSAP


MSAP-X3 is the compact Multi-Service Access Platform (MSAP) compatible with ITU-T standard. It is designed as a cost-effective and flexible multi-service platform, with STM-1 / STM-4 level uplink ports and abundant optional downlink cards to provide typical E1 traffic, PCM, optical tributary, EOS and EOP traffic access and aggregate.

As an important feature, in MSAP-X3, the SDH uplink module and Ethernet uplink module can work simultaneously. Between the SDH uplink module and each sub-slot, there are two STM-1 LVDS connections, and similarly, between the Ethernet uplink module and each sub-slot, there is one LVDS Gigabit Ethernet connection. With this backplane design, TDM traffic in SDH/MSTP network and packet traffic in IP network can be distributed and aggregated in MSAP-X3.

A powerful timeslot cross-connection and IP data switching facility is supplied in MSAP-X3. With the ability of connecting various network topologies, reliable self-healing mechanism, and unified intelligent management system, it is suitable for enterprise access, private network interconnection, mobile base stations connection and video monitoring applications.


Feature

l  Structure

ü   3U height, 19 Inch width standard, 9 card slots.

ü   LVDS clock-free backplane, independent SDH bus and GE bus architecture.

l  SDH uplink card

ü   Up to 2× STM-1/STM-4/STM-16 interfaces.

ü   LC type SFP module, hot-pluggable.

ü   48VC4×48VC4, or 72TU-3×72TU-3, 1512VC12×1512VC12 non-blocking cross-connection.

ü   Single/double terminal 1+1 linear Multiplex Section protection and SNCP protection.

ü   Point-to-point, chain and ring network topology.

l  Ethernet uplink card

ü   Up to 2 GE optical ports and 2 GE electrical ports.

ü   Aggregate the 1000M Ethernet traffic from up to 3 downlink cards;

l  Diversified downlink cards

ü   Diversified downlink cards include optical downlink, E1, PCM and Ethernet downlink cards.

ü   Communication with the remote Ethernet media converter, SDH and MSTP terminals.

ü   Supports 1+1 path protection.

ü   Supports the embedded E1 BERT testing function.

l  Timing

ü   Traces any timing source of STM-1/4 up links or STM-1 optical tributaries, or external timing source.

ü   Supports External timing output.

ü   The timing source can be switched manually or automatically.

ü   Supports free-running, tracing and hold-over modes.

l  System Management

ü   Supports ZSView network management platform based on C/S architecture.

ü   Supports DCC and EXM (Extended E1 interface for management) channel for communication between gateway and elements.

ü   Supports DCN channel for the communication between gateway and server.

ü   Supports SNMP_V1 and SNMP_V2 protocol.

ü   Supports local and remote firmware online update without disturbing existing traffic.

ü   Provides top-mounted aural-visual alarm output.

Line Card List

Type

Name

Model

Description

Slots

SDH uplink

STM-4 uplink

CU622

2×STM-4, DXC and SET.

1

STM-1 uplink

CU155

2×STM-1, DXC and SET.

1

STM-16 uplink

CU2501

2×STM-16, DXC and SET.

1

Ethernet uplink

Ethernet uplink with layer 2 switch

CUGE4A

2×GX+2×GE, supports port-based VLAN and 802.1QVLAN, and trunk function.

Aggregates the Giga Ethernet traffic from 8 slots at most.

2

Downlink

E1 mapping

E1-16

16 E1, 75Ω and 120Ω selectable.

2,3,4,5

E1-32

32 E1, 75Ω and 120Ω selectable.

2,3,4,5

PCM

DXCCH30

Full cross-connection among thirty 64Kb/s timeslot of 64E1, with the capacity of 1920*1920 64Kb/s. 8 PCM sub-module slots, up to 30 FXS/FXO/magneto voice channels or 16 2/4 wire E&M autio or 16 RS232/RS485/64K data interfaces totally.

2,3,4,5

TUCH30

8 PCM modules, up to 30 FXS/FXO/magneto voice channels or 16 2/4 wire E&M autio or 16 RS232/RS485/64K data interfaces totally.

2,3,4,5

SDH optical tributary

TU155-8

8×STM-1, DXC, supports P2P, P2MP, chain and ring topology.

2,3,4,5

TU155-4

4×STM-1, DXC, supports P2P, P2MP, chain and ring topology.

2,3,4,5

PDH optical tributary

TUP155-4

4×PDH optical interface, DXC, used to connect remote PDH equipment, supports point-to-point and star-type network.

2,3,4,5

TUP155-8

8×PDH optical interface, DXC, used to connect remote PDH equipment, supports point-to-point and star-type network.

2,3,4,5

TUP1250

2×GE+2×OPT(1.25Gb/s), achieve 16 E1 and 2 gigabit Ethernet data transmission over optical line of 1.25Gb/s.

Multiple 1GE&16E1 mixed traffic optical rings to enhance the traffic protection ability of the entire system.

2,3,4,5

EoSDH

EOS-8FX8

8×FX, 8 physical isolated VCG, with EoSDH, GFP/LCAS/VCAT, flow control, TS1000 protocol.

2,3,4,5

EOS-4FX4

4×FX4 physical isolated VCG, with EoSDH, GFP/LCAS/VCAT, flow control, TS1000 protocol.

2,3,4,5

EOS-8FE8

8×FE, 8 physical isolated VCG with EoSDH, GFP/LCAS/VCAT, and flow control.

2,3,4,5

EOS-8FE8A

8×FE, 8VCG, EoSDH,GFP/LCAS/VCAT.

With Ethernet switch, 8 Ethernet can also be aggregated to Giga Ethernet without EoSDH.

Port-based VLAN and 802.1Q VLAN, QinQ.

2,3,4,5

EOS-4FE4A

4×FE, 4VCG, EoSDH,GFP/LCAS/VCAT.

With Ethernet switch, 4 Ethernet can also be aggregated to Giga Ethernet without EoSDH.

Port-based VLAN and 802.1Q VLAN, QinQ.

2,3,4,5

EOS-16GE2A

1 ×COMBO + 1 × GE + 1 × FE, 16VCG, EoSDH, GFP/LCAS/VCAT.

With Ethernet switch, the Ethernet can also be aggregated to Giga Ethernet without EoSDH.

Port-based VLAN and 802.1Q VLAN, QinQ.

2,3,4,5

Ethernet switch

ETH-FX8A

8×FX, port-based VLAN , 802.1Q VLAN, QinQ, TS1000 protocol. Achieve Ethernet aggregation from 8 remote Ethernet Media Converters.

2,3,4,5

ETH-FX4A

4×FX, port-based VLAN , 802.1Q VLAN, QinQ, TS1000 protocol. Achieve Ethernet aggregation from 4 remote Ethernet Media Converters.

2,3,4,5

 EoPDH

EOP-16GE2A

1×COMBO +1×GE+1×FE. 16VCG, EoPDH, LCAS/VCAT.

With Ethernet switch, the Ethernet can also be aggregated to Giga Ethernet without EoSDH.

Port-based VLAN and 802.1Q VLAN, QinQ. Supports GFP for multiple E1, and GFP/HDLC for single E1.

2,3,4,5

Management

Management unit

NMU3

Real time SNMP based management unit, supports cascading connection applications.

6

Power

DC power module

PW150DCM

Redundant-backup Power modules, with the power consumption of 150W, supports management function, such as power input/output alarm indication.

7,8

AC power module

PW150ACM

7,8

DC power module

PW100DCM

Redundant-backup Power modules, with the power consumption of 100W, supports management function, such as power input/output alarm indication.

7,8

AC power module

PW100ACM

7,8

Fan

Fan tray

FAN3

Fan tray

9

Fan tray with management

FAN3M

Fan enable/disable and temperature threshold configurable, supports temperature display real time and fan alarm monitor.

9

PCM sub-module list

Model

Name

Description

PCM-4FXS

Foreign exchange station module

Provides a 4ch FXS interface, connects to user phone directly. Works with PCM-4FXO module to achieve extension of PBX user line

PCM-4FXO

Foreign exchange  office module

Provides a 4ch FXO interface, connects to PBX user interface. Works with PCM-4FXS module to achieve extension of PBX user line.

PCM-4MAG

magneto telephone module

Provides a 4ch magneto telephone interface, adopts 2100Hz inband signaling with signaling transmission and detection function, mainly apply to order wire, private line etc,. Occasions.

PCM-2EM-2/4

2/4 wire E&M audio module

Provides 2ch 2/4 wire E&M audio without signaling, supports 2/4 Wire mode online switch.

PCM-2RS232

RS232 Interface module

Provides a 2ch RS232 asynchronous interface, each channel occupies one 64K time slot. Supports rate from 0Kbps19.2Kbps.

PCM-2RS485

RS485 interface moudle

Provides a 2ch RS485 asynchronism interface, each channel occupies one 64K time slot. Supports rate from 0Kbps19.2Kbps, half-duplex mode.

PCM-2CD64K

64K data module

Provides a 2ch 64K data interface, complies with ITU-T G.703

Application

3000-应用1.jpg

Figure: Typical application

3000-应用2.jpg

Figure: PCM application



Product name:     *
name:     *
mobile:     
tel:   
Country:     
Email:    *
Address:   
Content:     *
      
Online